Smart 4-20mA Pressure Transmitter LED Indicator Transmitter Module

Product Details
Customization: Available
Type: Normal Pressure Transmitter
Structure Type: Diffused Silicon Pressure Transmitter
Manufacturer/Factory & Trading Company

360° Virtual Tour

Diamond Member Since 2016

Suppliers with verified business licenses

Audited Supplier

Audited by an independent third-party inspection agency

Year of Establishment
2014-01-16
Management System Certification
ISO9001:2015
  • Smart 4-20mA Pressure Transmitter LED Indicator Transmitter Module
  • Smart 4-20mA Pressure Transmitter LED Indicator Transmitter Module
  • Smart 4-20mA Pressure Transmitter LED Indicator Transmitter Module
  • Smart 4-20mA Pressure Transmitter LED Indicator Transmitter Module
  • Smart 4-20mA Pressure Transmitter LED Indicator Transmitter Module
Find Similar Products

Basic Info.

Model NO.
JTST-LED
Measuring Medium
Gas, Steam, Liquid
Accuracy Grade
0.1 0.2 0.5
Pressure range
0~600bar
IP Rating
IP67
Certification
ISO
Customized
Customized
Output Signal
4~20mA, 1-5V
Housing Material
304 Stainless Steel
Stability
0.25% F.S./Year
Zero Drift
50% of Full Range Span
Transport Package
Each Set in One Individual Carton with Foam
Specification
Stainless steel
Trademark
WNK
Origin
Anhui, China
HS Code
90262010
Production Capacity
12000set/Month

Product Description

         Smart 4-20mA Pressure Transmitter LED Indicator Transmitter Module

Introduction:
JTST-LED Small Size Intelligent Transmitter Module, with the main body of Microcontrollers CPU, is able to do logical operation and programming. It combines analog and digital circuit in one machine, so is able to output analog signal as well as digital signal as per customer's requirement. Parameters configuration and compensation can be done by adjusting programs to approve accuracy grade of transmitters. Adopting HIRSCHMANN connector, JTST-LED is transmitter, display, buttons and communication in one and same device, and can be directly connected with piezoresistive silicon sensor or ceramic piezoresistive sensor to be high performance pressure transmitter. Thus it is more cost-efficient.


Features:

1. Four-bite high light LED displaying

2. Two wires working mode provides sensors with two exciting ways - constant current and constant voltage.

3. Calibrating as per full scale realizes bulk production and assures aging test time.

4. Easy to do temperature compensation, the complete machine accuracy is better than 0.5% under -30~70ºC

5. Three points calibrating, complete machine accuracy better than 0.2%. Multi-point calibrating is available as required.

6. AD accuracy > 20 bits, DA accuracy > 16 bits;

7. Multi-functions as temperature compensation, small signal wipes off, zero clearing and etc.

8. On-site adjusting can be done by bottons

9. HIRSCHMANN connection


Technical parameters:

Supply power DC12-32V (DC 24V is suggested)
Constant current excitation 0.4mA(suitable for diffused silicon, strain gauge sensors)
Constant voltage excitation 2.5VDC(suitable for piezoresistive ceramic pressure sensors)
Sampling rate 20~30times/s
Displaying mode High light  LED displaying,displaying 4 digits,3 digits after the decimal point
Displaying units Ten displaying units as KPa, Pa, MPa, mmH2O, mH2O, mbar, bar, PSI, M,%
Output resolution 1uA
Temp. compensation accuracy -30~70ºC complete machine accuracy is better than 0.5% (including accuracy of sensor)
Linearity accuracy Complete machine linearity better than 0.2% (Multi-point calibrating is available as required)
Stability 0.2%/Year
Range ratio 10:01
Circuit protection Measurement surge current protection, reverse power protection
Circuit design Intrinsic safety
Isolation range >200MΩ
Communication Protocol Private protocol
Adjusting method By machine head or program on pc ( zero clearance can be done on-site)
Matching transmitters Suited for small size HIRSCHMANN displaying type transmitters
Dimensions Length=31mm, width=20mm, mounting hole pitch=12.5mm (suited for small size columnar pressure transmitters and input type level transmitters)

Smart 4-20mA Pressure Transmitter LED Indicator Transmitter Module
Smart 4-20mA Pressure Transmitter LED Indicator Transmitter Module
Smart 4-20mA Pressure Transmitter LED Indicator Transmitter Module
Smart 4-20mA Pressure Transmitter LED Indicator Transmitter Module
Smart 4-20mA Pressure Transmitter LED Indicator Transmitter Module
Smart 4-20mA Pressure Transmitter LED Indicator Transmitter Module
FAQ
Q1: Are you manufacturer or trading company?                                             
 A: We are professional pressure/level/temperature measurement manufacturer with more than     13 years of experience. Our factory address is: 4/F,Bldg #6, No.168, Xiangzhang Road, High-tech District, 230088, Hefei, Anhui province, China.

 Q2: What's your quality control system?
A: We are an ISO 9001-2015 certified manufacturer, we have strict quality control system. Besides clibartiaon, each set product we also do temperature compensation and aging test before shipment, so the quality is guaranteed.

 Q3: What is the warranty of your products?                                                      
A: 12 month from shipment date, for non-man-made damages.
 
 Q4: Can we use our logo on the products? Do you provide customized products?            
Yes.we can use your logo, we can provide customized products per requirement. OEM/ODM is welcome
 Q5: What is yor MOQ?
A: We have no MOQ limits, small quantity order is acceptable.

 Q6: What's the transport?                                                              
A: Express such as DHL, Fedex, TNT, UPS for freight prepaid, also can use your own couier account to do the freight collect. For more goods we can arrange by air or by Sea.

Send your message to this supplier

*From:
*To:
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now
Contact Supplier