Differential Pressure Sensor Medical Spirometer Use

• Customization: Available
• Sensing Type: Mems
• Contact: Contact
• Model NO.: WNK1108
• Output Signal Type: RS485
• Production Process: Normal Wirewound
• Material: PPS
• Measuring Medium: Differential Pressure and Micro Flow
• IP Rating: IP22
• Certification: CE
• Customized: Non-Customized
• Trademark: WNK
• Origin: Anhui, China
• Production Capacity: 10000set/Month

Product Description

Differential pressure sensor medical spirometer use

 

 

 

 

Specification:

−Used in medical ventilator (ICU ventilator and household ventilator)
− High sensitivity below 10 Pa for measuring small flow
− Quick response, can realize effective trigger function
− Based on the special sensor technology of WNK Electronics, it has excellent performance
− No drift, no hysteresis
-After full calibration and temperature compensation
− Insensitive to installation direction and vibration
− Both I2C and analog output

 

The gas differential pressure sensor WNK1108 is a new product successfully launched by WNK Electronics. The response speed of the WNK1108 has been optimized to meet the requirements of medical ventilators.
The achievable measurement range of WNK1108 is as follows:
• -5 to 125 Pa (0.5 inch H2O)
• -20 to 500 Pa (2 inch H2O)
• -100 to 3500 Pa (14 inch H2O)
• -500 to 500 Pa (+/-2 inch H2O)
• -62 to 62 Pa (+/-0.25 inch H2O)
• Scope of other OEM requirements  

                                                                                                                                                             
The WNK1108 housing is durable and made of chemically resistant PPS; wide range ratio, zero drift, excellent long-term stability,high quality and low price, it is the first choice for HVAC and medical equipment OEMs. ADP1108 is fully compliant with RoHS and REACH standards.
 

 

 

The WNK1108 is powered by 5.0V and provides I2C and 0.25 to 4V signal output. Although it is an analog output, the internal linearization and temperature compensation are all digitalized, so the accuracy and resolution are high (up to 0.05Pa), and the temperature is minimally affected.
Its leading performance is based on WNK Electronics' patented technology, which integrates the sensing element and signal amplification and A/D conversion on the same PCB. The differential pressure is measured by the thermal sensing element. Compared with other thermal differential pressure sensors, the amount of air required is very little, so even in harsh environments, the operation is also safe and reliable. Compared with the diaphragm sensor, the WNK1108 has a wider range ratio, more stable performance, and excellent repeatability in the low differential pressure section (see Figure 1 and Figure 2). In addition, the WNK1108 can withstand large momentary pressures and is insensitive to installation direction and vibration..

Application

-Home ventilator
-Intensive care ventilator (ICU)
-Invasive and non-invasive ventilator
-Newborn ventilation
-CPAP ventilator
-Sleep apnea monitor
- Anesthesia Machine
-Spirometer

 

Performance curve

Temperature compensation

The WNK1108 differential pressure sensor has a precision built-in temperature compensation circuit. Through the on-chip
temperature sensor, the temperature on the chip is measured, and the data is fed back to the MCU, eliminating the need for external temperature compensation.

 

Highly calibrate
 

The WNK1108 differential pressure sensor uses dynamic measurement principles to give it unparalleled performance. The measured differential pressure only needs a small amount of airflow through the sensor. The indicated differential pressure is therefore affected by the surrounding air density. The temperature effect on the density is compensated by   internal intelligence ). According to the following formula, the correction factor is used to compensate for the change in ambient pressure due to the effect of density, and there is a representative level change.

 

 

Company Information

 

 

 

 

 

 

 

FAQ

Q: Are you manufacturer or trading company?                                             

A: We are professional pressure/level/temperature measurement manufacturer with more than 13 years of experience. Our factory address is: 4/F,Bldg #6, No.168, Xiangzhang Road, High-tech District, 230088, Hefei, Anhui province, China.

 

Q: What's your quality control system?

A: We are an ISO 9001-2015 certified manufacturer, we have strict quality control system. Besides clibartiaon, each set product we also do temperature compensation and aging test before shipment, so the quality is guaranteed.

 

Q: What is the warranty of your products?                                                      

A: 12 month from shipment date, for non-man-made damages.  

 

Q: Can we use our logo on the products? Do you provide customized products?                          

Yes.we can use your logo, we can provide customized products per requirement. OEM/ODM is welcome

 

Q: What is yor MOQ?

A: We have no MOQ limits, small quantity order is acceptable.

 

Q: What's the transport?                                                              

A: Express such as DHL, Fedex, TNT, UPS for freight prepaid, also can use your own couier account to do the freight collect. For more goods we can arrange by air or by Sea.